With the gradual improvement of people’s living conditions, environmental issues have become more and more of people’s concerns. More and more sewage treatment projects have installed gravel separators and sewage recovery systems. This equipment is mainly used for cleaning and cleaning impurities in materials. Separate, but in the long-term use of the equipment, the equipment will be worn to different degrees, which will seriously affect the production efficiency of the equipment. Therefore, in daily use, pay attention to the maintenance and maintenance of the equipment to ensure that the equipment can continue to work stably.
1. Nowadays, the transportation vehicles of many cement silo mixing stations are social vehicles, and the mobility of personnel is relatively large, which makes the management of our mixing stations more difficult. They only take a few more trips to earn more freight, but for cleaning The discharging of the mixer truck is not operated according to the regulations, which causes the material to be blocked and the discharging of the washing tank is not clean. The material is accumulated in the material tank. Without special care, the agglomerates and solidification in the tank are difficult to clean, which is the separation of sand and gravel. The machine is not working properly.
2. If there is leftover material in the mixer truck, the driver should follow the originally set procedure. This will easily cause material blockage or even damage to the separator equipment, because the original set procedure is for normal transportation. For the operation, if the cleaning time is shortened, such as cleaning only for 10 minutes, it is obviously unable to meet the requirements for cleaning and separation of residual materials! Therefore, it is necessary to have special personnel to operate, change the automatic to manual, carry out standardized operation, so that the leftover material is completely separated, and then switch to the automatic program after the separation is completed. Only such correct operation can ensure that the separator is not normal. Operation, the damage to the separator of most mixing plants is caused by this!
3. Regular cleaning and discharging of the waste outlet of the gravel separator (concrete gravel separator). The sewage outlet should be cleaned every other month during use to prevent mud agglomeration and block the sewage outlet, especially in winter. Clean the drain outlet regularly.
4. Regarding the use of sand and gravel separators, the management personnel of the concrete mixing plant should attach great importance to it. No matter how advanced the equipment is, it must be managed and used correctly. The driver of the mixer should also strengthen management and learning, so as to enable the enterprise Realize greater benefits!
https://www.limesilo.com/