The activated carbon silo consists of three parts: the top is mainly composed of the top, dust collector, guardrail, and manhole. The top is the top part of the activated carbon silo; the main function of the dust collector is to get out the dust in the silo; the guardrail is the top guardrail. The long-term working environment of the activated carbon silo is dusty, so the cleaning work is particularly important. Let's take a look at how to clean the activated carbon silo.
1. Carry out the maintenance and maintenance operations of the items specified in the maintenance regulations on a regular basis, such as cleaning, lubricating, and refueling.
2. Before starting the activated carbon silo, check whether the controllers are in good condition. After stopping work, pour water and stones into the mixing drum for 10 to 15 minutes for cleaning, and then remove the water and stones. If the operator needs to enter the mixing drum for cleaning, in addition to cutting off the power supply and removing the fuse, the switch box must be locked.
3. It is forbidden to use a sledgehammer to remove the concrete accumulated in the activated carbon silo, only a chisel can be used to remove it.
4. In the severe cold season, use water to clean the drum of the activated carbon silo after the work is completed and drain the water in the pump, water tank, and water pipe to prevent the pump, water tank, and water pipe from being damaged by freezing.
In this way, the service life of the activated carbon silo can be guaranteed, and now it is entering the cold winter. Pay more attention to these issues.
https://www.limesilo.com/