During the use of the spiral blade, there will definitely be some problems due to the wear and tear of the equipment. After a long period of use, the edge of the spiral blade will gradually become thinner and even fall off from the conveying equipment due to continuous wear and tear. As a result, the screw conveying equipment cannot be used normally. The thinning of the spiral blade has always been a problem of user relations, so what kind of impact will the thinning of the spiral blade have on the conveying equipment?
1. In the normal operation of the equipment, the speed of boosting and pushing is actually determined according to the bending conditions of the equipment, so it is required to be consistent with the speed of the hydraulic pipe bending machine. Of course, it is also necessary to check whether the installation position of the mandrel is appropriate, and if it is found to be wrong, it must be adjusted in time.
2. Due to the bending and cracking on the outside of the pipe arc of the equipment, we must carefully find out the reason at this time to ensure the heat treatment capacity of the pipe.
Due to the influence of external force for a long time, the spiral blade becomes thinner during the compression process. At this time, we need to make reasonable adjustments so that such a situation will not occur in subsequent operations and affect the normal operation of the equipment. use.
https://www.limesilo.com/
