The working principle of the shaftless screw conveyor is that the spiral blade and the liner are in contact. Under normal use, wear will occur. The conveying length and stability of the material and the conveyor are determined). The longer the conveyor length, the greater the deviation of the concentricity of the equipment itself, that is, the degree of wear will be relatively serious (compared to a relatively short screw conveyor);

The wear section of the conveyor section is relatively large, which has a lot to do with the scraping of the end blades.

When we design and produce the equipment, we take into account that the equipment is relatively long. During the on-site installation process, the concentricity error of the equipment during operation may be relatively large. Therefore, the stainless steel spiral groove body is all realized by CNC hemming machine (the error of the hemming is basically zero), instead of the general common hemming machine (and the manufacturing cost of this method is relatively low), this is to ensure After the equipment is assembled, the concentricity is on the same straight line, so that the equipment has a long service life and stable operation, and the internal wear of the equipment will be relatively small. The photos and videos of the equipment factory assembly can be seen.

Material-olive fruit. In the process of separation, the shell and core produced have a certain degree of hardness, which also has certain factors or effects to aggravate the wear of the wear-resistant liner;
https://www.limesilo.com/
