One of the main advantages of the metering screw conveyor is its flexible design. They have multiple discharge and entry points. You can design the screw conveyor to have multiple entry and release points. In this way, bulk materials can be transferred and dispersed to different locations. The inflow and outflow of the screw conveyor can also be controlled by adding valves or sliding doors. Screw conveyors usually take up less space.
A screw conveyor manufacturer usually makes the size of the equipment. Screw conveyors do not take up a lot of space because they usually do not have belt conveyors. This is another major advantage. The screw conveyor is a continuous conveyor without flexible traction parts. Screw conveyor is used for conveying powdery, granular, small loose materials with low friction.
In the transportation process, it is mainly used for horizontal transportation (usually below 30m) or small inclination. Inclined transportation. In a few cases, it can also be used for large inclination and vertical transportation. Screw conveyors can handle many bulk materials from slow to free flow. *The screw conveyor can have multiple inlets and outlets. Bulk materials can be transported and distributed to various locations as needed.
You can add sliding doors or valves to control the flow into and out of the screw conveyor. *When a screw conveyor is used as a metering device, it is regarded as a screw feeder. Screw feeders are used to start material processing by metering products from hoppers or hoppers. The screw conveyor is a bulk material transportation equipment that can handle a variety of materials with relatively good flow capacity.
The flow ability finds the CEMA material classification standard, and expresses the degree of freedom of individual material particles to move with each other. This feature is very important in the operation of the screw conveyor, because the screw is installed on the tube or shaft, rotates in the fixed groove or the fixed pipe, pushes the material along the bottom and the side, and shares the material in the radial gap between the screw and the groove. And when the moving surface of the spiral tends to lift the material, the material will roll by itself.
https://www.limesilo.com/