Lime storage tanks are usually used as supporting equipment for concrete mixing plants and are also one of the important equipment of lime dosing system. Lime silos are usually required to be down fixed at regular intervals and have high stability. The following is the working principle of common lime storage tanks:
The lime storage tank has a cylindrical structure, and the bottom is supported by four round pipe legs to support the entire silo body. The entire silo is in the form of a steel structure and is welded; the top is equipped with a dust collector and a pressure safety valve. When the lime silo is loading, turn on the dust collector button at the top to effectively load the material while preventing dust from overflowing and eliminate the source of pollution. During the loading process, press the arch breaking button continuously to prevent the solid lime material below from causing arched airflow; the loading is complete, Close the loading port, close the dust removal device, double-click the arch breaking device, check whether the remote PLC monitors the material level to see if it is normal, adjust the powder scale meter, and start unloading.
Commonly used lime storage tank supporting conveying equipment is screw conveyor, concrete-yang mechanical screw conveyor and reasonable matching according to the site topography, stable and continuous transportation performance, accurate determination of multi-lime dosing and good effect.
https://www.limesilo.com/