Safety measures required for spiral blades during processing:
1. Never touch the connection point of the interface. If the external part has been installed, you cannot touch it. You can only allow professional workers to open it.
2. Before using the equipment, you must be optimistic about the required voltage, and then adjust the voltage of the transformer to the voltage you need.
3. All power sources of the equipment must be grounded.
4. Any equipment must be isolated from the power supply before it is opened.
5. Be sure to close all power supply equipment, even if it is an insulator, but the power still exists.
6. Personnel who perform inspections and repairs must first conduct electrical knowledge training. Check each circuit diagram.
What should be paid attention to in terms of electricity when processing spiral blades:
1. The switch must be insulated, and its equipment must be stable. After work, be sure to check whether the power switch is in a closed state.
2. Before opening the electrical box, the power supply and the machine must be isolated. The main power supply of the equipment must be turned off, and it must be written on the equipment that no outsiders are allowed to enter.
3. Inspection personnel and maintenance personnel must undergo professional training before they can start work.
4. We must operate according to the rules when installing.
5. The most important thing is that the power supply must be grounded.
6. People must not touch the connected circuit directly with their hands.
As the primary component that directly contacts with the material and promotes the movement of the material, the screw blade has an irreplaceable position. The application of the product processing must first determine its specific type. Generally, the screw blade of the screw conveyor has a solid type, a belt type, and a blade Type and tooth shape are divided into four types, and their corresponding application characteristics and processing technologies are different. For example, solid-type spiral blades are used to transport powdery and granular materials; belt-type spiral blades are suitable for conveying powdery and granular materials. Small block materials; blade type and tooth blade are more suitable for transporting materials with high viscosity and compressibility. According to different types, corresponding manufacturing technology is adopted.
https://www.limesilo.com/