The increase in spiral blade wear does not appear all at once, but will go through three different stages. In these three stages, the degree of wear is different. If corresponding measures can be taken in time, it can be effectively Ease wear and tear at every stage.
The first stage: the running-in stage of the spiral blades
Due to processing technology issues, the surface of newly shipped spiral blades is relatively rough, so during the initial working period, its surface will rub against the material, thereby polishing the blades smoother. Wear and tear during this period is normal and good wear and tear. Just like the engine of a newly purchased car needs to be broken in, only the same car can develop its full performance.
The second stage: use and wear stage
When the first stage of running-in is completed, the performance of the spiral blades can be maximized. The gap between it and the machine will also remain at a normal value. At this time, if you can do a good job in maintenance, such as creating a good lubrication scene, you can effectively reduce the occurrence of wear and greatly extend the service life of the spiral blades.
The third stage: accident wear stage
No matter how good the maintenance and upkeep is, it cannot withstand the wear and tear of time. When the spiral blades are worn to a certain extent, even if you ensure sufficient lubrication, the wear of the spiral blades will still be severe when used in the later part of the life cycle of the spiral blades. These stages will cause the wear of the spiral blades to increase rapidly, which can easily cause failures and accidents due to friction with the machine.
https://www.limesilo.com/